變形鋁板的分類方法很多。目前，世界上大多數國家通常按照以下三種方法對其進行分類:
　　There are many classifications of deformed aluminium sheets. At present, most countries in the world usually classify them according to the following three methods:
　　(1)根據合金的狀態圖和熱處理特點，將其分為兩大類:非熱處理強化鋁板和熱處理強化鋁板。非熱處理強化鋁板:純鋁，
　　(1) According to the state diagram and heat treatment characteristics of the alloy, it can be divided into two categories: non-heat treatment strengthened aluminium plate and heat treatment strengthened aluminium plate. Non-heat treatment strengthened aluminium sheet: pure aluminium,
　　鋁錳、鋁鎂、鋁硅合金等。熱處理強化鋁板包括鋁鎂硅、鋁銅、鋁鋅鎂合金等。
　　Al-Mn, Al-Mg, Al-Si alloys, etc. Heat treatment strengthened aluminium sheet includes aluminium magnesium silicon, aluminium copper, aluminium zinc magnesium alloy and so on.

　　(2)根據合金的性能及使用,它可以分為:工業純鋁、切割鋁板、耐熱鋁合金板、低威力鋁板,中度鋁板,高強度鋁合金板(duraluminum),于鋁板(duraluminum)防銹鋁板,偽造的鋁板和特殊鋁板等。
　　(2) According to the properties and usage of the alloy, it can be divided into industrial pure aluminium, cutting aluminium plate, heat-resistant aluminium alloy plate, low-power aluminium plate, moderate aluminium plate, high-strength aluminium alloy plate (duraluminum), rust-proof aluminium plate in aluminium plate (duraluminum), forged aluminium plate and special aluminium plate.
　　鋁板生產廠家
　　Aluminum plate manufacturer
　　(3)根據合金中所含的主要元素，可分為:工業純鋁(1xxx系統)、鋁銅合金(2xxx系統)、鋁錳合金(3xxx系統)、鋁硅合金(4xxx系統)、鋁鎂合金(5xxx系統)、鋁鎂硅合金(6xxx系統)、鋁鋅鎂銅合金(7xxx系統)、LXXX系統。7xxx系列(8xxx系列)和儲備合金組(9xxx系列)以外的合金。嗎?
　　(3) According to the main elements contained in the alloy, it can be divided into: industrial pure aluminium (1xxx system), aluminium-copper alloy (2xxx system), aluminium-manganese alloy (3xxx system), aluminium-silicon alloy (4xxx system), aluminium-magnesium alloy (5xxx system), aluminium-magnesium-silicon alloy (6xxxx system), aluminium-zinc-magnesium-copper alloy (7xxx system) and LXXX system. Alloys other than 7xxx series (8xxx series) and reserve alloy group (9xxx series). Do you?
　　這三種分類方法各有特點，有時相互交叉，有時相互補充。在工業生產中，大多數國家采用第三種方法進行分類，即按合金中所含主要元素的四位數法進行分類。該分類方法能從本質上反映合金的基本性能，便于編碼、存儲和計算機管理。我國目前也采用四位數字進行分類。
　　These three classification methods have their own characteristics, sometimes overlapping and sometimes complementing each other. In industrial production, most countries use the third method to classify, i. e. according to the four-digit method of major elements in alloys. This classification method can essentially reflect the basic properties of alloys and is easy to code, store and manage by computer. At present, four digits are also used for classification.
　　以上是鋁板生產廠家為大家整理的相關內容，想要了解更多內容，歡迎訪問網站：http://m.speif.com
　　Above is the related content that the aluminium plate manufacturer arranges for everybody, want to know more content, welcome to visit the website: http://m.speif.com