現在很多地方將使用鋁卷,一些不太正常的鋁卷生產廠家交付的產品,可能是由于天氣、交通和其他外部原因導致鋁輥上的一些污漬,用戶在使用絕緣鋁卷應該如何清理這些污點?
　　Now many places will use aluminum coil. Some products delivered by some abnormal aluminum coil manufacturers may be due to some stains on the aluminum roll caused by weather, traffic and other external reasons. How should users clean these stains when using insulated aluminum coil?
　　1、相關操作人員使用大量潔凈水對板材的外觀、表面的灰塵、粉塵進行清洗干凈。
　　1. Relevant operators use a large amount of clean water to clean the appearance, surface dust and dust of the plate.
　　2、選購市場上的標準洗潔精，用清水稀釋后，再與柔軟潔凈的布結合，輕輕擦拭測試板，清除鋁輥上的頑固污漬。

　　2. Choose the standard detergent on the market, dilute it with water, combine it with soft and clean cloth, wipe the test plate gently, and remove the stubborn stains on the aluminum roller.
　　3、保溫鋁輥廠家建議，此時再用大量的水清洗鋁輥，就能將污垢洗掉。
　　3. The manufacturer of heat preservation aluminum roller suggests that at this time, a large amount of water should be used to clean the aluminum roller, so that the dirt can be washed away.
　　4、仔細檢查鋁輥，看是否有不干凈的地方。對于未清洗的零件，可用稀釋的洗滌劑處理。
　　4. Check the aluminum roller carefully to see if there is any unclean place. For parts not cleaned, they can be treated with diluted detergent.
　　這時再用大量的清水進行清洗，直到所有的洗滌劑都能被洗掉。
　　At this time, wash with plenty of water until all the detergents can be washed off.
　　其實，鋁板鋁輥上面存在的污漬不一定是保溫鋁輥廠家運輸時造成的，也可能是用戶儲存不當造成的，所以我們也要學會保溫鋁輥正確的儲存方法。
　　In fact, the stain on the aluminum plate roller is not necessarily caused by the transportation of the insulated aluminum roller manufacturer, but also may be caused by improper storage by the user, so we should also learn the correct storage method of the insulated aluminum roller.
　　以上是鋁卷生產廠家小編為大家介紹的相關內容，想要了解更多內容，歡迎訪問網站：http://m.speif.com
　　The above is the relevant content introduced by the aluminum coil manufacturer. If you want to know more, please visit the website: http://m.speif.com