鋁卷是建筑、機械等行業中非常常用的一種材料，具有耐腐蝕、耐熱、美觀性高等特點。那么該產品在生產線上的加熱方式都有哪些呢？鋁卷生產廠家為您介紹：
Aluminum coil is a very common material in construction, machinery and other industries. It has the characteristics of corrosion resistance, heat resistance, beauty and so on. What are the heating methods of the product on the production line? The aluminum coil manufacturer introduces to you:
1、電加熱。電能作為一種干凈的能源在很多方面都表現出了方便等優勢，電能至少有四個方面的優勢：
1. Electric heating. As a clean energy, electric energy has shown advantages of convenience in many aspects, including at least four advantages:
（1）使用方便。電能在傳輸方面的優勢使得電加熱的速度大大提高，有些依*電能做能源的加熱方式甚至不需要經過預熱過程，如紅外加熱的方式。這樣一來可以提高鋁材的生產效率和線速度，縮短固化時間，傳統的燃?xì)夥绞胶茈y滿足快速固化的要求，而利用紅外、近紅外、電感、光電手段等電加熱技術，可將涂料的固化時間縮短到3-15秒，這類技術在高速的生產線中已經得到廣泛的應用。
(1) Easy to use. The advantage of electric energy in transmission has greatly improved the speed of electric heating. Some heating methods based on electric energy do not even need to go through the preheating process, such as infrared heating. In this way, the production efficiency and linear speed of aluminum can be improved, and the curing time can be shortened. The traditional gas method is difficult to meet the requirements of rapid curing. However, the curing time of coating can be shortened to 3-15 seconds by using infrared, near-infrared, inductive, photoelectric and other electric heating technologies, which have been widely used in high-speed production lines.
（2）符合可持續發展的要求。燃?xì)饧訜崴牡氖遣豢稍偕茉矗娔軄碓春軓V，在一定程度上屬于再生能源。
(2) Meet the requirements of sustainable development. Gas heating consumes non-renewable energy, while electric energy is from a wide range of sources and belongs to renewable energy to a certain extent.

（3）投資規模小。燃?xì)饧訜岱ㄒ度胂鄳?yīng)的儲氣設備、燃燒設備、凈化設備及相關的安全設備，一次性投入大，而電能的投資就很小。
(3) The investment scale is small. The gas heating method requires the investment of corresponding gas storage equipment, combustion equipment, purification equipment and related safety equipment. The one-time investment is large, while the investment of electric energy is small.
（4）干凈衛生。使用電能加熱可以解決廢氣問題，鋁卷生產線產生的尾氣可以經過焚燒處理，產生的能源可以作為其他用途，從而解決生產線的環保問題。
(4) Clean and sanitary. The use of electric energy heating can solve the problem of waste gas. The tail gas generated by the aluminum coil production line can be incinerated, and the energy generated can be used for other purposes, thus solving the environmental protection problem of the production line.
2、燃?xì)饧訜帷Ｈ細饧訜崾悄壳皯?yīng)用較多的方式，主要使用天然氣、煤氣等燃料。該種方式更加經濟，且生產過程中的尾氣也可以回收利用。缺點是污染大、升溫速度慢、安全性差。
2. Gas heating. Gas heating is currently widely used, mainly using natural gas, gas and other fuels. This method is more economical, and the tail gas in the production process can also be recycled. The disadvantages are large pollution, slow heating speed and poor safety.
（1）污染大主要表現為生產線本身要產生很多的尾氣，使用燃?xì)夥绞郊訜岵豢杀苊獾貢a(chǎn)生廢氣；
(1) The major pollution is that the production line itself will produce a lot of exhaust gas, and the use of gas heating will inevitably produce exhaust gas;
（2）升溫速度慢主要是燃?xì)饧訜嵋袀€(gè)預熱過程；
(2) The slow heating rate is mainly due to the preheating process of gas heating;
（3）安全方面，由于燃?xì)饧訜釙a(chǎn)生明火，而生產線上大多是有機溶劑，這些明火一定程度上會對生產線的安全性構成潛在危險。
(3) In terms of safety, due to the open fire generated by gas heating, and most of the production lines are organic solvents, these open fires will pose a potential risk to the safety of the production line to a certain extent.
以上是對于鋁卷生產線加熱方式的介紹，你都了解了嗎？如果您有相關需要的話，可以來電訂購http://m.speif.com。
The above is an introduction to the heating method of the aluminum coil production line. Do you understand it? If you have relevant needs, you can call to order http://m.speif.com 。